CatCams camshaft 280°/280° for Fiat 4cyl 1.6L 8v DOHC engine
For 'conventional' applications where pricing is important , Cat Cams offers a vast range of high quality chilled cast iron camshafts. Typical applications are fast road and moderate competition camshafts. Development of a casting requires high production volumes, so these are only available for a limited number of big volume applications.
When castings are not (yet) available, the steel billet production line at Cat Cams brings the answer: the development cycle for the BMW Mini R56 Turbo engine was about 6 weeks from arrival of the sample parts. The work included design and manufacturing of steel billet camshafts (see picture below), cam profile design and development of a dual valve spring kit.
For more demanding applications such as dedicated competition projects, the steel billet production line gets in action as well. Beside casting availability, there are some other reasons to prefer steel billet camshafts: gun drilling a 20mm hole over a length of 400mm saves about 1kg. Thanks to this reduction, the weight of Cat Cams steel billets rivals assembled hollow lightweight camshafts. However, the advantage of these 'single piece' steel billets is an important improvement in stiffness and strength, allowing higher acceleration cam profiles. You find a datasheet of this profile at the end of this text, where you can find out, if and which parts like springs, retainers, camwheeks you may need. You may be able ti find these parts in this shop just by searching with the partnumber, if not, please feel free to contact us.
engine: Fiat
detail: DOHC engines
engine code: CatCams camshaft 280°/280° for Fiat 4cyl 1.6L 8v DOHC engine
capacity: DOHC 8v
extra info: 1585cc
duration @ 0,1mm:
duration @ 1,0mm: 280°/280°
application: sport
remarks:
There are 3 different partnumber ranges: 1 for each type of distributor drive:
- PN19003xx: distributor fitted on the engine block (not driven by camshaft)
- PN19113xx: distributor driven by a sleeve at the rear of the exhaust camshaft
- PN19123xx: distributor drive gear between the camlobes of the exhaust camshaft. 2 versions exist: only right geared camshafts are available!
Please make sure to order the correct camshaft for your engine, corresponding with the correct partnumber range. On the website, only the "PN19003xx" partnumber range is shown, the last two digits (xx) are the same for the same cam profiles
Datasheet (PDF)
