KW Variant 1 for VW Bus T6, Multivan, Transporter; (7HC,7HCA,7HM,7HMA,7HK,7J0,7HKX0) ohne DCC / without DCC
KW Coilovers Variant 1Sporty handling combined with outstanding looks.
With factory pre-configured damping.
The KW Variant 1 "inox-line" coilover kit is our entry model for increased driving pleasure with an individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion resistant springs and bump stops as well as compatible components stands for long driving pleasure - not just the car\'s life.
Setup - Factory pre-configured damping setup
The KW Variant 1 "inox-line" coilover allowing you to experience an optimized balance of sportiness and comfort while driving. Even with full load and maximum axle loads, the dampers always work with a sporty characteristic.
Continuous lowering
With the KW Variant 1 you can achieve maximum lowering in the tested range. Even after years of use you can easily adjust the height due to the dirt resistant trapezoid thread and composite collar.
The benchmark for tuning fans
KW Variant 1 "inox-line" coilover satisfies the sporty driver with its harmonic basic setup. For each vehicle our engineers develop a specific damper setup and spring rate to increase the driving pleasure with optimal balance of sportiness and practicality. In the end, you are not just buying any coilover, but a KW coilover which has been developed specifically for your particular vehicle. As a manufacturer, KW uses only its own resources, high quality components and the same damper technology as high-volume manufacturers. With the KW coilovers Variant 1 "inox-line", rolling motions of the body will be reduced during compression giving you the benefit of genuine directness and sportier handling while driving.
max. zulässige Achslasten (max allowed axle weight:
VA (FA): -1710
HA (RA): -1720
Leistung (power): 62-150 kW
geprüfte Tieferlegung
VA (FA): 35-65 mm
HA (RA): 30-65 mm
Hinweise (comments): 2),62)
