12mm to 18mm Motorcycle Bung Adapter
Order Number: 3835
Bluetooth MTS adapter
Order Number: 1128
Using this adapter you can replace the serial wired connection to your PC, by a wireless Bluetooth connection.*
* PC requires bluetooth interface, not included.
Using this adapter you can replace the serial wired connection to your PC, by a wireless Bluetooth connection.*
* PC requires bluetooth interface, not included.
Bosch knock sensor
Order Number: 1112
Bosch knock sensor
Bosch knock sensor
Bosch LSU4.2 5-wire, wide-band O2 sensor
Order Number: 3737
Standard sensor shipping with LM-2 and LC-1
Standard sensor shipping with LM-2 and LC-1
Exhaust clamp for O2 sensor
Order Number: 3728
Patent-pending, Venturi-effect, tapped exhaust clamp for obtaining accurate lambda measurements in non-cat autos or other engines.Pushing the O2 sensor into the tail pipe, without this exhaust clamp, does not deliver correct results
Patent-pending, Venturi-effect, tapped exhaust clamp for obtaining accurate lambda measurements in non-cat autos or other engines.Pushing the O2 sensor into the tail pipe, without this exhaust clamp, does not deliver correct results
Exhaust gas temp. sensor
Order Number: 1100
for precise, fast and durable measurement of exhaust gas temperature we do recommend this high quality Typ K probe.
Perfect in combination with LMA-3, DL-32 and TC-4.
for precise, fast and durable measurement of exhaust gas temperature we do recommend this high quality Typ K probe.
Perfect in combination with LMA-3, DL-32 and TC-4.
Fluid & Air temperature Sensor
Order Number: 1116
HBX II Heat sink
Order Number: 3729
Heat sink to reduce max. temperature of the O² Sensor.Can be used with short bungs only, do not use with long bungs !
Heat sink to reduce max. temperature of the O² Sensor.Can be used with short bungs only, do not use with long bungs !
High quality pressure sensor, to be used for oil- or fuelpressur
Order Number: 1106
High quality pressure sensor, to be used for oil- or fuelpressure.
High quality pressure sensor, to be used for oil- or fuelpressure.
Inductive pickup clamp
Order Number: 3834
Inductive pickup clamp, for RPM pickup at ignition cable.
Can be used with LM-2, DL-32, LMA-3 (adapter cable included)
Inductive pickup clamp, for RPM pickup at ignition cable.
Can be used with LM-2, DL-32, LMA-3 (adapter cable included)
Intake Air temp. sensor
Order Number: 1105
for precise, fast and durable measurement of intake air temperature we do recommend this high quality Typ K probe.
Perfect in combination with LMA-3, DL-32 and TC-4.
for precise, fast and durable measurement of intake air temperature we do recommend this high quality Typ K probe.
Perfect in combination with LMA-3, DL-32 and TC-4.
LM-2 / DL-32 SD card 2GB
Order Number: 3787
Memory card for LM-2 or DL-32. SD 2GBrequired for data recording without PC
Memory card for LM-2 or DL-32. SD 2GBrequired for data recording without PC
LM-2 Analog/RPM In/Out cable
Order Number: 3811
Analog Input and Output Accessory Cable for LM-2 (Needed for RPM Input).and also for output of AFR signal to feed ino ECUs
Analog Input and Output Accessory Cable for LM-2 (Needed for RPM Input).and also for output of AFR signal to feed ino ECUs
LM-2 Carrying case
Order Number: 3836
Case for secure transport and protection of your LM-2.(Shipping without any Tools)
Case for secure transport and protection of your LM-2.(Shipping without any Tools)
LM-2 OBD-II Cable
Order Number: 3809
To connect the LM-2 to the vehicles OBD-II port. (As Included in the LM-2 Complete Kit) 5 1/2 ft
To connect the LM-2 to the vehicles OBD-II port. (As Included in the LM-2 Complete Kit) 5 1/2 ft