Clamp, Tial 44mm / Tial MVR Inlet
Car: Extern
Partno.: TIL-WGT-017
Clamp, Tial 44mm / Tial MVR Outlet
Car: Extern
Partno.: TIL-WGT-018
Diaphram, F38 (2 bolt flanged 38mm AND V44MM (OLDER V-banded 44mm) TIAL WASTEGATES
Manufacturer: Tial
Car: Extern
Partno.: ATP-FLS-106
Diaphram, F38 (2 bolt flanged 38mm AND V44MM (OLDER V-banded 44mm) TIAL WASTEGATES
Manufacturer: Tial
Car: Extern
Partno.: ATP-FLS-106
External Wastegate Gasket (35-38mm)
Car: Extern
Partno.: TBN-GSK-001
Flange, Tial 40mm (or 41mm) Inlet
Car: Extern
Partno.: TIL-WGT-008
Flange, Tial 40mm (or 41mm) Outlet
Car: Extern
Partno.: TIL-WGT-009
Flange, Tial 44mm / Tial MVR Inlet
Car: Extern
Partno.: TIL-WGT-015
Flange, Tial 44mm / Tial MVR Outlet
Car: Extern
Partno.: TIL-WGT-016
Flange, Tial 44mm Valve Seat, Ring, Stainless Steel
Car: Extern
Partno.: TIL-WGT-019
Flange, Tial 46mm Inlet/Outlet
Car: Extern
Partno.: TIL-WGT-010
Flange, Tial V-banded 38mm MVS (V38) Wastegate Inlet Flange
Car: Extern
Partno.: TIL-WGT-023
Flange, Tial V-banded 38mm MVS (V38) Wastegate Outlet Flange
Car: Extern
Partno.: TIL-WGT-024
Gasket for Tial 46mm Wastegate
Car: Extern
Partno.: TIL-WGT-013
TIAL 38MM MVS V-BAND SUPER SMALL WASTEGATE
Manufacturer: Tial
Car: Extern
Partno.: TIAL-MVS
Tial Air Fitting Set
Car: Extern
Partno.: TIL-WGT-014
Tial external Wastegate V60D
The V60D is everything you love about our V60 but with an inverted diaphragm designed for over 100 psi of actuation control pressure. The inverted diaphragm design takes the standard wastegate idea and turns it upside down, allowing for boost control on the top port of the wastegate. Using only a light spring to hold the valve closed with no boost pressure you are able to control this wastegate to much higher boost levels using positive pressure against the diaphragm with sources such as onboard CO2. A conversion kit for a V60 to a V60D is also available!
SPECIFICATIONS
- High temp NiCrFe based alloy valve and 347SS valve housing offer longer product life compared to competing designs.
- High temperature silicone Nomex reinforced actuator diaphragm.
- 17-7 PH Stainless Steel actuator spring gives consistent pressure at high temperature and resists "relaxing" up to 900F (483C).
- Nitronic 60 Stainless Steel is used for the valve seat and valve bushing.
- All Stainless Steel hardware.
- Mating weld flanges are 304L Black anodized aluminum actuator.
- Flows 330CFM @ 1psi differential pressure
Included with every TiAL V60D:
- V60D Assembly
- V60 Valve Seat
- 2 TiAL Air Fittings
- Inlet Flanges and Clamps
- Outlet Flanges and Clamps
Tial F38 Wastegate
Manufacturer: Tial
Car: Extern
Partno.: TIAL-F38
Tial MVR 44mm V-Band Wastegate
Manufacturer: Tial
Car: Extern
Partno.: TIAL-MVR
Tial Q Blow Off Valve
Car:
Partno.: TIL-BOV-007